VRSF Performance HD Intercooler FMIC Upgrade Kit 07-12 135i/335i/X1 N54 & N55 E82/E84/E90/E92

$379.99 Regular price $449.99
by VRSF
SKU:

2007-2012 BMW 135i/335i/X1 N54 & N55 Performance Intercooler Upgrade Kit

Replace your overheated factory intercooler with the VRSF upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

Intercooler Core

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heat soak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

We remedy this problem with our custom bar and plate core designs which utilizes a staggered and offset high density internal and external fin pack. Our cores have been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.

The VRSF 5″ Stepped HD, 7″ HD and 7.5″ Stepped HD Intercoolers are the most cost effective options to lower intake temps on a full bolt on car without compromise. With the 5″ Stepped HD intercooler you can expect to see a 4 degree rise during a 3rd gear pull on the stock turbos. The 7″ Performance HD will show a drop in starting intake temp due to the overall increase in heat absorption and dissipation. In comparison, the OEM intercooler rises about 32 degrees during the same 3rd gear pull. If you’re upgrading turbos, our new 7.5″ HD Stepped Competition HD has been proven to support up to 850whp throughout a 3rd gear pull with only a 2 degree rise in intake temperatures The VRSF 7.5″ HD Competition Intercooler is comprised of a much denser fin pack both internally and externally. It’s not uncommon to see intake temperatures drop at the end of a 2 – 4 gear pull due to the Competition HDs larger overall surface area. You can expect to see an intake temperature reduction on a stock turbo, full bolt on car during a 3rd gear pull which is why we recommend the Competition HD over the regular Performance intercooler if your budget allows. For anyone looking to run larger upgraded turbos above 850whp, we recommend our 7.5″ Race core.

Our 7″ FMIC has been involved in many record breaking builds and is currently featured on the current world’s highest horsepower N54 @ 861WHP.

Finish & Construction

Our VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow in comparison to sheet metal end tanks. Our one piece seamless cast end tanks are also more durable than comparable sheet metal or multiple piece end tanks. Every VRSF intercooler is finished in a beautiful, uniform, bright silver coating which helps protect the intercooler from corrosion and ensures your VRSF intercooler holds up to the elements, no matter where you live.

Every VRSF product includes our lifetime warranty & our “No Hassle” satisfaction guarantee which includes fitment & defects.

Installation

Both VRSF intercoolers feature tabs that allow the retention of the factory fan shroud. We also include additional mounting hardware for extra support. We include everything required to replace the OEM intercooler, including custom molded couplers and stainless steel t-bolt clamps necessary for installation.

The 5″ stepped core unit does not require trimming of the black plastic shroud (minimal trimming may be required on some models) . The 7″ Performance HD and 7.5″ Stepped Competition HD intercoolers require trimming of the black plastic shroud behind the bumper. The bumper does not require trimming with either models. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.

Features

  • High Density Bar & Plate Core
  • Cast Aluminum End Tanks
  • Easy install, less than 2.5 hours
  • Includes lower charge pipe
  • Includes lifetime warranty

Fits the following BMWs

2007-2013 E90/E91/E92/E93 BMW 335i/xi
2011-2013 E92 BMW 335is
2008-2013 E82 BMW 135i
2012-2015 E84 BMW X1 35i

 

VRSF 7" N54/N55 FMIC Datalog

 

PREORDER POLICY:

Items listed with an ETA posted are subject to our PREORDER POLICY. Pre order sales will be subject to a 15% cancellation fee in the event the customer no longer wants to wait for the item.

Items listed on sale and on pre order are not subject to cancellation. ALL SALES FINAL. 

 

RETURNS AND REFUNDS
Rush Customs will only handle returns for the direct purchaser. If the purchase was made from a retailer other than rushcustomsllc.com, please contact the place of purchase for further assistance.

You must open and inspect items within 48hrs to confirm no damage and or correct product in order to qualify for a refund or exchange. 


Returns on ‘new’ merchandise for exchange or refund will be allowed within 30 days from the date of shipment. ‘New’ merchandise cannot be used or show signs of damage from installation or mounting. If you install or modify parts ordered in any way, you automatically waive your right to returns, refunds or exchanges. Exchange shipping costs is the responsibility of the customer.

All returns must be accompanied with a ‘return merchandise authorization’ (RMA). To receive an RMA, you must contact Rush Customs at sales@rushcustomsllc.com. When requesting an RMA, please provide the following details: Name, Order Number, Date of Purchase, and Phone Number. Returns will not be processed without an RMA. Returns must also be received within 14 days from the issuance of the RMA. A RMA does not guarantee a refund or replacement.

All returns will be inspected upon return to Rush Customs for return eligibility. Returns must be shipped prepaid by the customers. Please maintain all shipping and tracking information until your return is processed since Rush Customs is not responsible for items lost in shipment. Shipping charges are not refundable. Please include a copy of your original invoice and contact information with all returns.

Eligible returns will be exchanged or refunded less a 20% restocking fee. Refunds will be issued by check or to the credit card used for the original purchase.

Purchases may be cancelled for a full refund before the order ships. Please contact Rush Customs immediately at sales@rushcustomsllc.com to stop the processing of an order. Once cancellation is confirmed, a credit will be issued.

Orders already shipped from Rush Customs facility or drop-shipped vendor's place of business cannot be cancelled and will fall under the Returns for Refund or Exchange guidelines.

Special order or customized items cannot be cancelled, returned or exchanged.

It is the responsibility of the customer/installer to verify the proper size and application of all parts before installation.

We will not be responsible for packages marked as delivered. It is the customers responsibility to file a lost or stolen package claim with the shipping company used for shipping. 

 

INTERNATIONAL CUSTOMERS

You will be responsible for paying any customs or duty fees related to your shipment. Rush Customs will not be held liable for items that have been refused delivery due to customs fees and duties. Please email us is you have any questions or concerns. 

 

 

We now offer price matching for major brands.

Price Match Guarantee

What qualifies?

Your product may be eligible for price matching if it is:

Identical to the competitor's product.

The product must be a matching brand, model number and color to qualify.

Immediately available at a qualifying online retailer, or a local competitor.

Only applies to advertised listed price from large websites. Does not include private message or private email deals.

EXCLUDED WEBSITES: We will not price match amazon, eBay, alibaba,begood,aliexpress, or any direct to China websites. 

Exclusions apply including, but not limited to, items sold by Marketplace vendors, competitors’ service prices, special daily or hourly sales, and items for sale the Sunday before Thanksgiving Day through the Monday after Thanksgiving.

Product brands may be disqualified at our discretion. 

Must include link to product and website in your email.

Send all price match requests to sales@rushcustomsllc.com